How To Make Your Own Ph-Neutral Floor Cleaner?

Whether it’s a bustling office space or an opulent residential property, clean and gleaming floors can enhance the overall feel and look of the space. Regular maintenance and cleaning can boost the endurance of flooring while promoting a healthy and hygienic indoor environment. Incorporating chores like sweeping, vacuuming, and mopping can prevent dust, dirt and grime buildup with ease.

However, store-bought floor cleaners available in the market are usually laden with hazardous chemicals that may damage the delicate surface, pollute indoor air quality and trigger allergies. So, be mindful when using such products in a home setup. Many cleaning professionals in Australia also recommend using safe and sound products to keep all types of floors clean and damage-free. That’s where a DIY pH neutral floor cleaner comes in. It is mild yet effective and can easily eliminate stains and gunk from hardwood, laminate, vinyl, marble and tile floors.

Here is a comprehensive guide to help you prepare a homemade pH neutral floor cleaner like a pro. You can add a few simple eco-friendly ingredients and achieve the desired results without releasing greenhouse gas emissions and other toxic fumes.

1. Understanding the pH balance in Cleaning Products

Do you know the meaning of pH neutral? The pH scale ranges from 0 to 14, and 7 is considered neutral. The cleaning solution below 7 is acidic, and anything above 7 is alkaline. Using too-acidic products like vinegar, lemon, and citric-based cleaners can etch the natural stone floors, while too-alkaline solvents can lead to dullness and deterioration.

However,  a pH-neutral cleaner is safe for almost all types of flooring, as it is gentle and non abrasive. The best part is that it won’t cause damage or leave streaks behind. Prepare the solution and dislodge stubborn stains and grime from the surface in a breeze and enhance indoor air quality.

2. Stock up on Essential Ingredients

Let’s begin the fun process by arranging all the necessary ingredients to create your own pH-neutral floor cleaner. All you need is:

• Distilled Water: It can help prevent streaking and mineral deposits
• pH-neutral dishwashing liquid: 1/3 cup of dishwashing detergent liquid can break down stains and grime.
• Castile Soap: It is a plant-based cleaning agent that can increase the cleaning efficiency of your cleaner.
• Microfiber Mop: It can absorb excess water, preventing your floors from getting damaged due to moisture buildup
• Essential oils: Adding a few drops of essential oils like lavender or tea tree can leave your floors sweet-smelling all day long.

You can also outsource a budget end of lease cleaning Sydney service to reclaim your bond money without stress.

3. Prepare a DIY pH Neutral Floor Cleaner

Once you’ve stocked all the necessary supplies, add 2 cups of hot water, 1 teaspoon of mild dishwashing liquid soap, 1 teaspoon of castile soap and 10 drops of essential oil in a bucket. Stir it well and avoid adding too much detergent liquid, as an excess amount can lead to damage or leave sticky residue behind.

Caution: If using white vinegar (pH value 2.5), check the compatibility with the floor. The acidic properties can cause damage to the surface, especially on natural stone and marble floors. It is always good to dilute vinegar with 2 parts of warm water.

4. Choosing the Right Cleaning Method For Different Uses

There are multiple ways to use pH neutral cleaner for your floors. Choosing the right method can make a world of difference in cleanliness and floor durability. Here’s what you need to know:

Spot Cleaning Your Floors:

Mix and spray the solution on the affected area of your floor, such as spills, splatters and gunk. Scrub with a sponge or cloth to break down gunk. If you understand the science behind cleaning, you can easily dislodge the stains. This method is perfect for laminate, hardwood , vinyl and marble floors.

Detailed Mopping:

Mix the solution into a bucket and dampen your microfiber cloth (not soaking wet). Wring out excess water and mop your floors from one end to another. This will help you achieve sparkling floors. Ensure you vacuum first to remove loose dirt and debris.

Tackle Stubborn Stains and Germs

Apply a small amount of solution to a cloth and gently scrub the area. Next, wet the magic eraser and scrub again to dislodge buildup grease, oil stains, pet stains, etc. Rubbing alcohol can also help you banish lurking germs effectively.  This is a crucial step during a quality end of lease cleaning Sydney, NSW, Australia to pass the rental inspection without any disagreement.

Note: Ensure you dry the floor after cleaning to prevent unpleasant streaks and water damage.

How to Store the DIY Cleaner Properly?

There is no denying that homemade cleaners have shorter shelf life than store-bought ones. To ensure DIY cleaners work really well, you need to store the cleaner property. It is good to use a dark-coloured bottle for storage as essential oils and castile soap can degrade in direct sunlight. Also, label the bottle and shake it before using it to make the most out of it.

Tip: Professional End of lease cleaners Sydney recommend preparing the solution in small batches that can be used two to four weeks.

Wrapping Up

Nothing works better than a homemade natural and gentle cleaning agent for your delicate and beautiful floors. With the help of this guide, you can easily prepare your own pH-neutral floor cleaner to prevent damage and discolouration during the deep cleaning process. The best part is that it is non-caustic, affordable and super-effective, leaving your flooring sparkling clean.