Tile flooring is perfect for bathrooms, kitchens, laundry rooms and other areas that might get wet regularly. They look sleek, shiny and neat if you keep them away from tough stains.
Whether its ceramic or faux tile, floors can quickly get dirty with coffee pills, splatters and other hard stains. However, with proper care and thorough cleaning, your tile floors can look like new again without even using harsh chemicals.
To get those sparkling results, you need to understand the complete stain removal process and streamline the tricks to get the best possible outcomes.
In case you are preparing your rental house for a final inspection at the end of tenancy, then you should hire professionals for detailed bond cleaning in Sunshine Coast. They use tried and tested stain-removal techniques to make your rental property look sparkling in a matter of a few hours.
But, if you are looking for some brilliant DIY ways to remove hard stains from tile flooring, then you should read this article carefully.
Before treating stubborn stains, make sure you remove all the grout, loose dirt and dust from your tile flooring. Use a heavy-duty vacuum cleaner with a soft brush to fetch all the accumulated and grime from ceramic and faux tiled floors.
Tip: Keep your floors clean and dirt-free, especially from corners. Also, try to vacuum clean your tile floors once or twice a week. It will hardly take 10-15 minutes.
Sometimes all you need is warm water to get rid of spills and splatters. First of all, cleanse the mop in warm water and then run it over the surface. Thoroughly mop the floor from right to left, repeat until the floor is cleaned.
This trick is useful when the stain is new/fresh. For stubborn stains, you need an effective cleaning solution and elbow grease.
Remove coffee and juice stains from tile flooring can be a tough job. You need something effective that can make your scrubbing job easier. Here is a great trick that can help you get rid of hard stains with ease.
All you need to do is to prepare a cleaning solution using 1 ½ cup of mild detergent and one part water. Mix it well and damp the mop. Now run it over the affected area and scrub it until the stain removes.
Many professional cleaners in Sunshine Coast recommend this trick because it is an easy trick and can make your floors look shiny again.
If the stain still persists after using the detergent and warm water solution, then try out this trick. Hydrogen peroxide is an effective, versatile and less-harmful cleaning agent that can help you remove tough stains from hard surfaces like tile flooring.
It has strong oxidising properties that make it a powerful cleaning and disinfectant solution. All you need to do is to blot the affected area on tile floors with hydrogen peroxide.
Use a clean microfiber cloth and blot it over the stain. Leave it for 10 to 15 minutes and rinse it with clean water. This trick work wonders and brings back the lost shine of your ceramic and faux tile flooring.
Build-up grease and other tough stains can make your tile floorings look dull and dirty, especially if you are at the end of your lease period. It is highly recommended to hire trained bond cleaners in Sunshine Coast if you want to secure your deposited money.
If you want to try some DIY grease removal trick, then buy a stiff-bristled brush from your local store. Since grease stains are difficult to remove, you can scrub the area using a bristled brush.
But before that, apply the homemade cleaning solution made of diluted bleach and hot water on it for half an hour.
The solution will loosen up the grease and make your scrubbing job easier.
Getting rid of mould and mildew from tile flooring can be a difficult task. But with this trick, you can treat it without using harmful chemicals. Mix one cup laundry bleach with 2 pints water.
Now, dap a sponge and apply it on mildew. Keep rubbing the area. If the mould remains, add a commercial mildew and mould remover in the same solution and use it again.
Tip: Don’t forget to wear gloves while applying market-based mildew removal.
If the oil-based paint is fresh on your tile floorings, then treat it as quickly as possible. Dip a cloth either in paint thinner or turpentine and apply it on the stain. Leave it for 10 minutes and scrub the area with a bristled brush.
For water-based paint, remove it using warm water and a mild detergent. Don’t forget to scrub the affected area for better results.
Removing hard stains from tile flooring has become super-easy with the pro tricks mentioned above in this article. Try these hacks and bring back the shine of your tiles.
If you don’t have enough time and want a reliable solution, then consider hiring experts for the best bond cleaning in Sunshine Coast. You will get the best quality of service with a 100 % bond back guarantee.
Here are some tips and advice from our experts on bond cleaning and related issues which affect people planning to make a move.
Regular cleaning is crucial in maintaining indoor air quality. Consistency is the key when it comes to dusting, vacuuming, and mopping surfaces in a home. It promotes a clean, healthy,...
Read moreA tidy, organised and well-maintained house can keep germs and viruses at bay, promote positive energy, bring prosperity, and improve indoor air quality. Sometimes, dusting, scrubbing, and mopping look like...
Read moreBathrooms can be a breeding ground for lethal germs and bacteria if not cleaned and disinfected properly. Cleaning every nook and cranny, especially a toilet, helps prevent the spreading of...
Read more