How to Clean Your Residential Property to Pass a Landlord Inspection

Property inspections by landlords can cause tenants a lot of stress because many of them fail to clean the premises thoroughly. When you are running at the end of your lease, make sure you prepare the property for the final inspection. Thorough bond cleaning is one of the ideal ways to get the security deposit back.

But due to lack of time or knowledge, most of the tenants in Australia are not able to pass the landlord inspection. The success is achieved only when people hire professional company for thorough bond cleaning in Australia. This is one of the best ways to prepare the rental premises for the inspection.

They understand what real estate agent expects from the end of lease clean and thus spruce up the home or office accordingly. While hiring trained and experienced bond cleaners in Australia is an ideal decision, it is also good to keep yourself updated with the basic cleaning tips that can help you impress your landlord after the final inspection.

Here are few useful ways to clean the property so that you can pass the inspection and get your bond money back.

1. Keep your walls clean

Most of the landlords in Australia hold back a part of the bond money if the walls are not properly cleaned. Being a tenant, it is essential for you to remove stains, dust and smudges from painted walls without causing discolouration.
Before getting into the process, make sure you determine what type of paint is on the wall.

If it is semi-glass or enamel paint, you can wash them to get rid of stains. But if it is flat or eggshell paint, then you need to be very careful while rubbing off the stains. You can start by dusting the painted walls to get rid of cobwebs and other dust particles. Use a vacuum cleaner along with the brush attachment to clean the edges/corners.

Once you are done with this, create a white vinegar and baking soda solution and apply it on the stains and smudges. To prevent your walls from damages, use this cleaning solution because it is mild as compared to commercial products. Wipe on the walls using a sponge and repeat it for better results.

Make sure you dry the walls properly with a towel to avoid streaking or water damage. For tough stains, mix ½ tsp of ammonia and baking soda in water. Apply it on the affected area and rub it using a sponge. Rinse with water and a clean microfiber cloth.

2. Clean Light fixtures, fittings and switchboards

No matter how often you spick-and-span your rental premises, there are some areas that you always forget to clean – the light fixtures, fittings and switchboards. If you are preparing your property for the landlord inspection, then keep them sparkling clean or else you could lose your security deposit.

Even, the most professional bond cleaners in Brisbane, Sydney, Sunshine Coast, Gold Coast, Melbourne, Adelaide and other cities of Australia often end up removing dust from light fittings and fixtures. Also, don’t forget to clean the switchboards of all your rooms.

The stains on switchboards sometimes take a lot of time to vanish. So, use an all-purpose antibacterial cleaning product to bring back the shine of your light fittings, fixtures and switchboards.

3. Remove dirt from hard-to-reach areas

Every home has some places that are so difficult to reach during the cleaning process. The job becomes tough when you are running at the end of your lease period. The dust on the top of cabinets, inside air vents, around the bathroom faucets and so on need proper cleaning, especially while preparing your property for the inspection.

Here are some useful cleaning tips to keep your hard-to-reach-areas tidy:

Air Vents

Vacuum clean the vents/ducts of your exhaust fans and air conditioner using a heavy-duty vacuum cleaner. Deeply clean the crevices of the ducts and also get rid of mould and mildew using an effective yet eco-friendly cleaning product.

Blinds

Remove dust from slats of your Venetian blinds using a 360 duster extender. Such tools can exceed up to 3 feet and traps the dust efficiently.

On the top of the cabinets

Use a vacuum cleaner along with a brush attachment to get rid of accumulated dust, dirt and grime from the top of the cabinets (cupboards, wardrobe, and bookshelves)

The Shower

Keep the base of your shower and tracks of the door clean using white vinegar and baking soda solution. Remove all the soap scrub by scrubbing the affected area properly.

4. Deep Clean your Kitchen

Conquering the kitchen mess is something that can make you feel anxious. If you really want to pass your landlord inspection, then deep cleaning and sanitising of the kitchen is crucial. Here is the quick guide for deep kitchen cleaning:

• Keep the countertops, stovetops and rangehood clean.
• Clear all the mess that doesn’t belong to the kitchen.
• Remove oil splatters, grease and tough stains using the all-purpose cleaner. Scrub off the stains and rinse with clean water.
• Clean the cupboards and shelves inside and out using a microfiber cloth
• Wipe down microwave, dishwasher and refrigerator.
• Clean and sanitise the sink using baking soda. Scrub of the grease and grime to achieve better results.
• Sweep the entire floor. Spot cleaning is also essential if you want to remove stains.

5. Scrub off stains from every bathroom surface

Ceramic Tiles

Remove soap scum and other tough stains from ceramic tiles using salt, baking soda and white vinegar. Scrub the stains using a wet pumice stone.

Glass Shower Doors

Spray the glass cleaner or homemade cleaning solution on the glass door and wipe off the surface using a wiper or microfiber cloth.

Washbasin

Soap scum and water spots are clearly visible on washbasin and faucet handles. It is good to remove built-up dirt and stains using the same solution.

Disinfecting Toilet Seat

Use hydrogen peroxide to clean and disinfect the toilet seat. Leave it for half an hour and flush it.

6. Keep Floors and Carpets Away from Dust

There is no denying the fact that your landlord will be evaluating the property from top to bottom. This means cleaning the floor coverings has become imperative if you want to pass your inspection. Use a vacuum cleaner to remove dry dust such as dead skin, dir pollens and hair dandles from carpet, rugs and hard-surface floor.

When it comes to cleaning the stains from the carpet, sprinkle baking soda and leave it for 10 minutes. Instead of scrubbing, blot the stains using a white cloth or paper towel. Also, sweep the floor to bring back its shine.

Tip: It is good to hire Australia’s best carpet cleaners who can deep clean the carpets and other floor coverings using the right equipment and efficient techniques.

Conclusion

Whenever it comes to a thorough end of lease cleaning to pass the final inspection, make sure you carry a custom-made checklist. Clean all the rooms of your premises according to the tips mentioned above in this blog post. For better results, consider availing professional and high-quality bond cleaning in Australia. Highly-trained cleaners can help you pass your inspection without any conflict.